燃烧器由哪些部件组成?(中英文)
主要结构
Main Structure
该组件构成了燃烧器的主要框架和轮廓。它有一个外壳和附属部件,并且用于功能系统的附加部件安装在主要结构上。
This component makes up the burner’s primary framework and outline. It has a housing and accompanying components, and additional items for a functioning system are mounted on the primary structure.
控制系统
Control System
该产品的该组件由压力或温度开关、火焰监测器、控制器、伺服机构(电机、液压缸)等组成。
This component of the product consists of switches for pressure or temperature, monitors for flames, controllers, servo mechanisms (motors, hydraulic cylinders), etc.
燃烧器控制单元:
Burner Control unit:
燃烧器控制的核心部件,类似于燃烧器的大脑,负责收集和触发每个动作的信号。这包括称为比例调节器的过程管理控制器、负责检测阀门泄漏的气体泄漏检测器等。
控制系统是任何带有机械驱动器的电动伺服电机和液压缸。原因是前者与程序控制器构成闭环控制系统,而后者由油泵提供动力,控制器实际触发指令执行,控制风门的开闭。
The central component of burner control, which is similar to the burner’s brain, is responsible for gathering and triggering the signals of each action. This includes the process management controller known as the proportional regulator, the gas leak detector responsible for detecting valve leaks, etc.
Control systems are any electric servo motors and hydraulic cylinders with mechanical drives. The reason is because the former and the programme controller constitute a closed-loop control system, but the latter is powered by the oil pump and the controller actually triggers the instructions for its execution, which controls the opening and shutting of the damper.
火焰监测仪:
Flame monitor:
该名称越来越被误解为行业内的通用名称,仅通过控制器类别中的火焰信号来调节开闭,偏离了真正的功能名称;可以观察到实际的火焰。用于检测火焰离子的光敏电阻、光电管、离子探针,如果具有独立开关电源的能力,都应该称为控制器。
This name is becoming more misunderstood as the common name in the industry, which only regulates the opening and closing by the flame signal in the controller category, deviates from the real function name; the actual flame may be observed. The photoresistor, photoelectric tube, and ion probe used to detect flame ions should all be referred to be controllers if they have the ability to independently switch on and off the power.
压力和温度开关:
Pressure and temperature switch:
它应该被称为广泛意义上的压力或温度传感器。其中燃气开关和气压开关分别用于调节燃气和气压(如果没有强制供气而产生气压则关闭整机电源)。大多数时候,温度开关用于调节高粘度燃料(例如重油或渣油)的加热温度。
It should be referred to as a pressure or temperature sensor in the broadest sense. Among them, the gas switch and the air pressure switch are used to regulate the gas and the air pressure, respectively (if there is no forced air supply and the air pressure is created, the power of the entire machine is switched off). The majority of the time, temperature switches are used to regulate the heating temperature of fuels with high viscosities, such heavy oil or residual oil.
点火系统:
Ignition System:
高压电缆、点火电极和点火变压器均包含在该产品的该组件中。用于产生高压电流并通过电极尖端放电以点燃燃烧器的部件是点火变压器和电极。
High-voltage cables, ignition electrodes, and ignition transformers are all included in this component of the product. An item used to produce high-voltage current and discharge it via the electrode tip to light the burner is an ignition transformer and electrode.
动力总成:
Powertrain:
在标准燃烧器中,需要连接到电源的部件是电动机。
In standard burners, the only component that need be connected to the power supply is the electric motor.
燃油供应系统:
Fuel Supply System:
在燃烧器上,这是较难理解的系统之一。事实上,该系统的机械部件比控制系统的电气部件复杂得多。燃油泵、燃油喷嘴、燃油加热器、燃油杯、燃油管、燃油电磁阀、燃气阀(包括燃气电磁阀)、燃气压力调节器、燃气过滤器。
On the burner, this is one of the systems that is more difficult to understand. In point of fact, the mechanical components that are a part of this system are far more complex than the electrical components that are a part of the control system. Fuel pump, fuel nozzle, fuel heater, fuel cup, fuel pipe, fuel solenoid valve, gas valve (including gas solenoid valve), gas pressure regulator, gas filter.
燃烧系统组件:
Combustion system components:
技术更先进的系统的行业标准。事实上,无论负责控制的电气产品有多先进,或者油泵有多先进,都一样。这些技术和方法的水平与燃烧器制造商的能力无关;相反,燃烧系统的设计要求它们是自力更生的。因此,燃烧器的性能取决于燃烧系统的水平。燃烧罐、鼓风机叶轮、火焰板、油炮、气芯管、内置或外置扩散器均是该产品的组成部分。该产品的该部件构成了空气和燃料预混合的装置。
The industry standard for the most technically advanced system. In point of fact, it does not matter how advanced the electrical products are that are responsible for the control or how advanced the oil pump is; the level of these technologies and methods has nothing to do with the capabilities of the burner manufacturer; rather, the design of the combustion system requires that they be self-reliant. of. Because of this, the capability of a burner is determined by the level of the combustion system. Combustion canister, impeller for forced air blower, flame plate, oil cannon, gas core tube and built-in or external diffuser are all components of this component of the product. A device for pre-mixing air and fuel is constituted by this component of the product.
声明:
- 文章转载自Mordor Intelligence,由爱泽工业翻译,如有侵权,请联系删除!
- 如有偏颇,欢迎指正!