BL AUTOTEC工具盘介绍

BL QUICK-CHANGE 是一种自动换刀装置，旨在使机器人和自动化设备能够自动更换末端执行器或其他外围工具。通过 BL QUICK-CHANGE 提供的快速可靠的换刀功能，单个机器人可以执行各种任务并减少设置时间，从而提高实际生产线效率和成本效益。

由于其设计中内置的安全性，BL QUICK-CHANGE 可以在最大负载能力下使用，保持每个型号中指定的位置重复性。

The BL QUICK-CHANGE is a device for automatic tool changing,designed to enable robots and automated equipment to automatically change end-effectors or other peripheral tooling With the quick and reliable tool changing provided by the BL QUICK-CHANGE, a single robot can perform a variety of tasks and reduce setup time,thus increasing actual production line efficiency and cost effectiveness.

The BL QUICK-CHANGE can be used under maximum load capacity, maintaining the positional repeatability specified in each model, thanks to the built-in safety in its design.

GC-300A系列介绍 / Introduction of GC-300A series

BL QUICK-CHANGE 型号 GC-300A 是一款自动换刀装置，专门用于更换点焊线上的物料搬运焊枪或内置变压器的焊枪。 GC-300A 可选择初级电流、气压和电信号（伺服）模块。GC-300A 提高了生产线效率和成本效益。

The BL QUICK-CHANGE Model GC-300A is a device for automatic tool changing, specially designed for changing material handling welding guns or guns with built-in transformers in a spot-welding line. Primary current, air pressure and electrical signals (Servo) modules can be selected for the GC-300A.The GC-300A provides increased production line efficiency and cost effectiveness.

GIGA系列介绍 / Introduction of GIGA series

GIGA 是一款自动换刀装置，专为搬运重负载的机器人而设计，负载能力为 350 公斤、400 公斤、500 公斤和 700 公斤。 GIGA 用于汽车行业的白车身处理和夹具底座更换。 也用于其他行业的重载、数控机床的装卸等。 除了搬运应用之外，GIGA 还可用于点焊枪更换应用。 GIGA 还可以使用QUICK-CHANGE ZEUS 系列模块。

GIGA is a device for automatic tool changing, designed for robots handling heavy-payloads, with weight capacities of 350kg, 400kg, 500kg, and 700kg.  GIGA is used for body in white handling and jig base changing in the automotive industry.  It is also used in other industries for heavy load palletizing, and loading and unloading of CNC machines. In addition to handling applications, GIGA can be used in spot-welding gun changing applications. GIGA can also use our QUICK-CHANGE ZEUS Series modules.

ZEUS系列介绍 / Introduction of ZEUS series

QUICK-CHANGE ZEUSTM 可用于点焊枪更换、材料处理和工具更换。可用于150-230kg的机器人有效负载。ZEUS 结合了经过验证的 BL Quick-Change 锁定机制。它是一种新型的快速更换装置，与 ZEUS 结合后重量轻且薄。

QUICK-CHANGE ZEUSTM is available such as spot-welding gun exchange, material handling and tool changing. It can use for robot payloads of 150-230kg. ZEUS incorporates the proven locking mechanism of the BL Quick-Change. It is a new, advanced Quick-Change, and ZEUS is light weight and thinness when coupled.

USP-100A系列介绍 / Introduction of USP-100A series

BL QUICK-CHANGE 型号 USP-100A 是一款薄型自动末端执行器更换装置，专为处理冲压零件的高速输送而设计。薄型设计使得平行位移臂上的末端执行器能够在冲压工艺中的成型应用中工作。即使开口较窄，也可以在不改变方向的情况下传送冲压件。

The BL QUICK-CHANGE Model USP-100A is a thin-shaped automatic end-effector changer designed to handle the high-speed conveyance of press parts. The thin design allows end-effectors on the parallel displacement arm to work on molding applications in press processes. Even if the opening is narrow, press parts can be conveyed without changing

Flex-300A系列介绍 / Introduction of Flex-300A series

BL QUICK-CHANGE Flex-300A 型是一款自动换刀装置，专为通常用于搬运和码垛的高负载能力机器人而设计。Flex-300A 可以选择可选的电触点或气动端口。

The BL QUICK-CHANGE Model Flex-300A is a device for automatic tool changing, specially designed for high payload capacity robots generally used in handling and palletizing. Optional electrical contacts or pneumatic ports can be selected for the Flex-300A.

QCP-220系列介绍 / Introduction of QCP-220 series

BL QUICK-CHANGE 型号 QCP-220 是一款自动末端执行器更换器，用于压力机搬运和装载应用，有效负载能力为 200 公斤，适用于大型面板和高速机器人。可直接安装在PCD125mm机器人法兰上。

The BL QUICK-CHANGE Model QCP-220 is an automatic end-effector changer used in press handling and loading applications, with a payload capacity of 200kg for large panels and high-speed robots. It can be directly installed on a PCD125 mm robot flange.

QC-150C系列介绍 / Introduction of QC-150C series

无需触摸即可锁定

主板可以锁定到工具板上，两者之间有间隙。

故障安全锁定机制

BL 独特的锁定/解锁机制包含机械故障安全功能，如果气压关闭，主板和工具板不会脱开。

Lock without touching

The Master plate can lock onto the Tool plate with a gap between them.

Superior fail-safe locking mechanism

BL’s unique lock/unlock mechanism contains a mechanical fail-safe feature which does not allow the Master and Tool plates to uncouple if the air pressure is shut off.

QCP-100A系列介绍 / Introduction of QCP-100A series

BL QUICK-CHANGE 型号 QCP-100 是一款自动换刀装置，用于冲压处理应用，用于切换零件吸附末端执行器。在工具板一侧很容易设置ID确认，并且块本身配备有保护盖。工具侧不带连接器的电信号接触块可作为选件提供。

The BL QUICK-CHANGE Model QCP-100 is an automatic tool changer used in press handling applications for switching part-adsorption end-effectors. It is easy to set up ID confirmation on the Tool plate side, and the block itself is equipped with a protective cover. An electrical signal contact block without a connector on the tool side is available as an option.

Flex-100B系列介绍 / Introduction of Flex-100B series

BL QUICK-CHANGE Flex-100B 型是一款用于快速、准确地自动更换多个末端执行器的设备，例如物料搬运、码垛和去毛刺。Flex-100B 可选择气动块和电气连接器块。

The BL QUICK-CHANGE Model Flex-100B is a device for quick and accurate automatic changing of multiple end-effectors, such as material handling, palletizing and deburring. Pneumatic blocks and electrical connector blocks can be selected for the Flex-100B.

Flex-70系列介绍 / Introduction of Flex-70 series

Flex-70 连接到机器人法兰上，以便快速可靠地更换末端执行器（例如工具）。工具板中的球锁系统具有坚固的规格，即使对于力矩负载也是如此。除了传统的气动端口、电信号和锁定/解锁传感器之外，现在还可以选择地面和接近传感器。可用于焊接、冲压处理和去毛刺应用。

带有接近传感器的接地和电信号模块作为常用电信号接触块、气动端口块和锁定/解锁传感器的选项添加。

Flex-70 is attached to the robot flange for quick and reliable exchange of end-effectors, such as tools.  The ball-lock system in the Tool Plate is a sturdy specification, even for moment loads. A ground and approach sensor are now available as options in addition to conventional pneumatic ports, electric signals and a lock/unlock sensor.  May be used in welding, press handling and deburring applications.

Earth contact and electric signal module with approach sensor are added as option to usual electric signal contact blocks, pneumatic port blocks and lock/unlock sensor.

QC-60D系列介绍 / Introduction of QC-60D series

无需触摸即可锁定

主板可以锁定到工具板上，两者之间有间隙。

故障安全锁定机制

BL 独特的锁定/解锁机制包含机械故障安全功能，如果气压关闭，主板和工具板不会脱开。

Lock without touching

The Master plate can lock onto the Tool plate with a gap between them.

Superior fail-safe locking mechanism

BL’s unique lock/unlock mechanism contains a mechanical fail-safe feature which does not allow the Master and Tool plates to uncouple if the air pressure is shut off.

Flex-40B系列介绍 / Introduction of Flex-40B series

BL QUICK-CHANGE Flex-40B 型是一种自动工具更换装置，旨在使机器人和自动化设备能够自动更换末端执行器或其他外围工具。球锁机构可实现高耦合力和增加力矩。为了满足特定应用要求，例如材料处理、装配和去毛刺，可以在气动端口和电气触点中选择各种选项，包括电机驱动的安培容量。

The BL QUICK-CHANGE Model Flex-40B is a device for automatic tool changing, designed to enable robots and automated equipment to automatically change end-effectors or other peripheral tooling. A ball-locking mechanism allows for high coupling force and increased moment. To meet your specific application requirements, such as material handling, assembly and deburring, you may select various options in pneumatic ports and electrical contacts, including motor-driving ampere capacity.

QC-20D系列介绍 / Introduction of QC-20D series

无需触摸即可锁定

主板可以锁定到工具板上，两者之间有间隙。

故障安全锁定机制

BL 独特的锁定/解锁机制包含机械故障安全功能，如果气压关闭，主板和工具板不会脱开。

Lock without touching

The Master plate can lock onto the Tool plate with a gap between them.

Superior fail-safe locking mechanism

BL’s unique lock/unlock mechanism contains a mechanical fail-safe feature which does not allow the Master and Tool plates to uncouple if the air pressure is shut off.

QC-10B系列介绍 / Introduction of QC-10B series

无需触摸即可锁定

主板可以锁定到工具板上，两者之间有间隙。

故障安全锁定机制

BL 独特的锁定/解锁机制包含机械故障安全功能，如果气压关闭，主板和工具板不会脱开。

Lock without touching

The Master plate can lock onto the Tool plate with a gap between them.

Superior fail-safe locking mechanism

BL’s unique lock/unlock mechanism contains a mechanical fail-safe feature which does not allow the Master and Tool plates to uncouple if the air pressure is shut off.

Light-5A系列介绍 / Introduction of Light-5A series

BL QUICK-CHANGE Model Light-5A是一款自动换刀装置，专为低负载能力机器人设计，通常用于电气零件、精密设备和机械零件的装配和搬运。在解锁过程中，Light-5A主板将工具板推开（自分离功能）。Light-5A 配有可选的轴插座适配器，可将其安装到轴型机器人上。

The BL QUICK-CHANGE Model Light-5A is a device for automatic tool changing, specially designed for low payload capacity robots, generally used in the assembly and handling of electrical parts, precision equipment and mechanical parts. During the unlocking process, the Light-5A Master plate pushes the Tool plate off (self-separating function). An optional shaft receptacle adaptor is available with the Light-5A to attach it to a shaft-type robot.

QC-1系列介绍 / Introduction of QC-1 series

QC-1是轻载机器人的自动末端执行器更换装置，适用于精密电气设备、精密机械的组装以及医疗产品、食品中的搬运用途等各种应用。

QC-1 is automatic end-effector exchange device for light load robot for various applications like a assembling of precise electric device, precise machine and handling purpose in medical product, food product.