IZE学院 订单查询

0086-21-31006702 联系我们 关于我们 账号注册及登录EN
您当前的位置: 首页 >> 产品中心 >> 检测-测量-传感器 >> PROSTAT表面电阻测试仪PRS系列 >> 电气检测及测量

PROSTAT 表面电阻测试仪PRS系列

请注意:照片可能并不是实际产品,具体请参阅标题和产品规格及所有细节描述。
产品品牌:
型号:PRS-801
PROSTAT表面电阻测试仪PRS-801
预估货期:
关  键  词:PROSTAT表面电阻测试仪PRS-801PRS-801RM
相似产品:
是否有问题?联系我们工作人员
  邮件联系

PROSTAT表面电阻测试仪PRS-801选型介绍

RANGE

Resistance from 0.1 (1.0E-1) Ohms to 200 Tera ohms (2.0E+14 ohms). Maximum Resistivity with ANSI/ESD STM S11.11 concentric ring 2.0E+15 ohms/square.

TEST VOLTAGES

Automatic Mode (Default): 0.01 volts to 10 volts Variable 1.0E-1 to 1.0E+4 Ohms

Constant Voltage:

10 volts: ± <0.2 volts 1.0E+4 to <1.0E+6 Ohms
100 Volts: ± <2.0 volts 1.0E+6 to 2.0E+14 Ohms

Manual Mode:

 0.01 volts to 10 volts Variable 1.0E-1 to <1.0E+5 Ohms
10 volts: ± <0.2 volts 1.0E+2 to 1.0E+9 Ohms
100 volts: ± <2.0 volts 2.0E+5 to 2.0E+14 Ohms

ACCURACY

 0.01 volts to 10 volts Variable 1.0E-1 to 1.0E+4 Ohms

Nominal Range Tolerances:

1.0E-1 to 1.0E+1Ω: ±5% corrected for test lead resistance
1.0E+1 to 1.0E+10Ω: ±2.0% with 10’ test leads
1.0E+11: ±5.0% with 10’ test leads
1.0E+12: ±12% with 10’ test leads
1.0E+13 to 2.0E+14Ω: <30% or ±0.25 decade with grounded, shielded lead

DISPLAY

Multi-function 2-5/8” x 1-5/8” Liquid Crystal Display with 0.5" digit height.
Displays 3-1/2 digits in Ohms, or 1.0EXX in exponential format.
Ohms Display indicators: Ω, KΩ, MΩ, GΩ and TΩ. Includes 19-segment analog scale (1-10 with 0.5 indication) with x1, x10, & x100 multipliers.
Number of Data Points in Memory (0 – 80).
Automatic Electrification Time (seconds), or Time required to Manually obtain steady state measurement.
Displays data HOLD, BATTERY status, MIN, MAX, AVG, REC and Test Voltage (<10, 10, or 100 V)

LED INDICATORS

14 Color LED’s from <103 to >1014 ohms.
Colors (RED, GREEN, YELLOW/ORANGE, or Blank/OFF)

TIMER

Times measurements in Seconds up to 99 seconds (Displayed on LCD)

MEMORY

Register stores up to 80 data points (MEM # Displayed after RESET)

RS-232 OUTPUT:

Digital format: Exponential Power followed by Integer

ELECTRIFICATION:


Resistance Range

0.1 to <1.0E06 Ohms
1.0E06 to <1.0E12
1.0E12 and greater

Electrification Period

<3.0 seconds
8.0 seconds 
15.0 seconds

Note: Electtrification period varies based on conditions & material stability.

POWER

Two 9-VDC alkaline batteries. Nominal battery life 25 hours in Automatic
Greater than 35 hours in Automatic Manual

DIMENSIONS

4.0" wide x 6.0" long x 2.0" deep.

WEIGHT

22 ounces, with batteries

OPEN CIRCUIT CURRENT (I)

<4 ma @ 100 Volts

RESISTANCE RANGE SELECT

2 Triangular Arrow Buttons: UP  and DOWN ¯.
Select Resistance Range in single decades in Manual and Automatic/Manual modes.

TEST VOLTS

Manual Selection of <10, 10 or 100 volts in Manual Mode

RECORD/RECALL

Turns Memory Register ON if OFF. Provides access to all data in Memory Register.
Calculates and Displays Minimum, Maximum and Average of data stored in Memory Register.

CLEAR

Erases all data in Memory Register; if in HOLD mode, discards the most recent Held Value

ON/OFF

Power-up, perform functional & Battery tests. Power down if ON.

BATT. TEST

Displays GOOD on LCD if acceptable voltage or Lo if unacceptable

RESET

Enters (saves) data into Memory Register, Clears HOLD and Display.

TEST

Begins measurement sequence.

BATTERY BUSS CUT OFF

ON/OFF Switch isolates batteries from instrument circuits for storage & transport

USEFUL MODES OF OPERATIONS

Auto Mode:

The instrument automatically selects and adjusts test voltage, resistance range, electrification period, then displays and Holds the measurement. The displayed measurement is the average of eight consecutive measurements, all within ±5% of each other. The measurement is “saved” in the Memory Register by pressing RESET. The instrument is now ready for the next measurement.

Manual Mode:

Allows operator to select resistance decade, test voltage and electrification period (EP).

Automatic Manual:

Same as Auto Mode with following exceptions:
- Allows operator to select starting resistance decade
- Always starts measurement from the last measurement value without resetting to zero. This extends battery life & speeds up measurement sequence.

DATA LOG & CALUCULATION

In RECORD mode, the PRS-801 stores up to 80 measurements, and on demand will calculate and display the Minimum, Maximum and Average measurements stored in the register. Using its RS-232 output and cable accessory, the PRS-801 will communicate with computer serial ports. The instrument is supplied with the new PROSTAT® Audit Program on a 3-1/2 inch disc, which contains spread sheet templates for recording ESD Audit Program Data in Excel® software. The PRS-801 computer output and Program disk are compatible with the Semtronics SCCN® ground monitoring system.

USAGE RECOMMENDATION

Designed for Intermittent use. Not intended for continuous use or production applications.

爱泽工业(ize-industries)并不是本网站所列所有产品的授权代理商或经销商。 本网站使用的所有产品名称,商标,品牌等均属于各自品牌厂家所有。 本网站在产品或图片描述中,出现具有这些名称,商标,品牌等信息的产品仅用于识别目的,并非旨在表明任何与持有者的从属及授权关系。

PROSTAT表面电阻测试仪PRS-801产品介绍

这是一款便携式,精密的电阻测量仪器,测量范围:< 0.1 TO 2.0 X 1014 欧姆

可精确地测量大量程的电阻:0.1 Ω to 2.0x1014 Ω,其标准的测量精度为:<±5%,最大量程为:2.0x1014 Ω

对于低阻值的测量,可提供0.1 mV to 9.99 V 可变的测量电压

对于国内外业界或ESD标准规定的高阻值的测量,可提供10 V和100V恒定的测量电压

自动控制所测量的电阻范围

自动选择测量用的电压

自动调节的充电周期 以确保获得最精确的测量

仪器内存可存放80笔测量数据

可将测量数据分批或单笔的下载至Excel格式文档

测量快速、灵活

 

PROSTAT表面电阻测试仪PRS-801附件清单

PROSTAT PRS-801 Resistance Meter

PROSTAT PRS-800BLB 10 foot Shielded Test Lead - Black

PROSTAT PRS-800LR 10 foot Silicone Test Lead - Red

PROSTAT PRS-801CIC Computer Input Cable

PROSTAT PRS-801SSL Shielded Test Lead

PROSTAT PRS-801TVL High Resistance Voltage Test Lead

PROSTAT PRS-801CC Calibration Shunt

PROSTAT PTB-915 Audit Test Bed

PROSTAT PRS-801TD Utility Software

PROSTAT PRS-801CON USB 2.0 to RS232 Serial DB9 Converter

PROSTAT PRS-801BC Bulldog Clip

PROSTAT PSI-870MAC Metal Clip (2)

PROSTAT User Manual

 

PROSTAT表面电阻测试仪PRS-801其他型号列举:

PROSTAT PTS-879

PROSTAT PFP-861

PROSTAT PFA-861H

PROSTAT ESI-870

PROSTAT PRS-801

PROSTAT PRS-812

PROSTAT PRS-801RM

PROSTAT PRF-911

PROSTAT PRF-912B

PROSTAT PRS-812RM

PROSTAT PRF-911PT

 

PROSTAT Main signal module NEW + ORIGINAL+ ONE YEAR WARRANTY

 

爱泽工业成立于2010年,定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气,液压以及气动解决方案的合作伙伴,我们利用我们的全球协作团队,为客户提供先进解决方案,市场知识以及相关增值服务来帮助优化客户的工作效率,提高可靠性和安全性,致力于成为工业产品和解决方案的优质渠道。

 

如果有任何关于PROSTAT表面电阻测试仪PRS-801的疑问,请随时与我们电联,(021-3100 6702),我们将尽全力解决您的问题。

 

If you have any question for PROSTAT products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: www.ize-industries.com.


PROSTAT表面电阻测试仪PRS-801产品介绍

免责声明:本网站的布局,设计和编辑版权归©上海爱泽工业设备有限公司(简称ize-industries)所有,保留所有相关权利。 Ize-industries销售工业领域的全新产品,库存产品,并不断开发渠道购买此类产品。 本网站未经所有制造商或商标授权或批准。ize-industries不是所有制造商的授权经销商,附属公司或代表处。除非另有明确说明,否则此处出现的指定商标,品牌名称和品牌均为其各自所有者的财产。