Precision guaranteed range

±1000 Pa

Excess pressure on sensors

5 MPa

Differential pressure

±2.5% of rdg ±1Pa, however 50Pa or below is ±2Pa

Display units

Test Pressure:

kPa、MPa

(Non-SI units available for overseas: PSI, kg/cm2, bar, mbar, mmHg, cmHg, inHg, etc.)

Leak volume

mL/min, L/min, mL/s, Pa/s, Pa/min, Pa, kPa, Pa・m3/s, E-3 Pa・m3/s, etc.

(Non-SI units available for overseas: mmH20, mmHg, inH20, etc.)

Displayed leak volume

3 to 5 digits (floating point), sample rate: 10/second

Number of Channels

32ch（0～31）

Timer setting range

999.9 seconds (resolving power: 0.1 second)

Power Source

AC100～240V±10%, 50/60Hz, 80VAmax

Test pressure source

Uses clean air.The original pressure must be sufficiently higher than the test pressure.

Pilot pressure source

Applies 400 to 700kPa of clean air.

CPU

Cortex-A9 800MHz 512MB DDR3

Pipe connection diameter

Rc1/4 (test pressure supply, pilot air supply, workpiece piping, master piping)

Ambient temperature

Operating temperature  5 to 45°C  Storage temperature:  -20 to 60°C

Humidity

80 %RH or less  No dew condensation

Mass

Approx. 140kg (standard specifications)

Serial communications RS232C-based
(D-sub9-pin)
2 port

I/F fixed length output

Leak data and set values are outputted simultaneously

ID/F fixed length output Standard settings

Leak data and set values are outputted simultaneously

T/F fixed length output

Only leak data outputted

USB Port

Saving data

Saves decisions, leak values, correction values, test pressure, WK#, CH#,  and time on inserted memory.
(Automatic file creation every 24 hours)

Set values storage

All channel settings, system settings, etc.

Standard accessories

Power cord

For use in Japan:  Rating: AC125V/7A, length: 3m
For export:   Rating: AC240V/10A, length: 2m (CE conformant product)

Interface connector (I/O), caps (2) for RS-232C, USB cover, test report, traceability documents, user manual

Peripherals

Master chamber, leak master, bypass unit, external exhaust valve, etc.