IZE学院 订单查询

0086-21-31006702 联系我们 关于我们 账号注册及登录EN
您当前的位置: 首页 >> 产品中心 >> 电气控制 >> 整流器 >> 输配电设备

整流器

请注意:照片可能并不是实际产品,具体请参阅标题和产品规格及所有细节描述。
产品品牌:
型号:BG1.5/BGE1.5/BMH1.5/BME1.5
SEW Rectifier Block BG1.5/BGE1.5/BMH1.5
预估货期:
关  键  词:SEW rectifier block BG1.5/BGE1.5/BMH1.5/BME1.5
相似产品:
是否有问题?联系我们工作人员
  邮件联系
爱泽工业(ize-industries)并不是本网站所列所有产品的授权代理商或经销商。 本网站使用的所有产品名称,商标,品牌等均属于各自品牌厂家所有。 本网站在产品或图片描述中,出现具有这些名称,商标,品牌等信息的产品仅用于识别目的,并非旨在表明任何与持有者的从属及授权关系。

Introduction to SEW rectifier block BG1.5/BGE1.5/BMH1.5/BME1.5/BME3

BG Brake Rectifier - Standard size up to 100, not suitable for frame sizes above 100

The brake rectifier BG is a half-wave rectifier with overvoltage protection.

The rectifier is used for small motors if no special requirements are required in terms of the release reaction time of the brake. It cannot be used at elevated ambient temperatures and cannot be used under the cooling conditions of the brakes.


BMH Brake Rectifier - Size 71 to 225

For low ambient temperatures, BMH brake rectifiers with heating current can be used to heat the brakes while the motor is stationary. Electric heating is always recommended, as it may cause moisture condensation, frosting or wet corrosive gases that rest for long periods of time. The BMH unit has the same electronic circuit 1Y as the BGE, thus providing the same short reaction time for the BM(G) brake.

The BMH is designed as a module in a DIN rail housing with a plug-in connection for control cabinet installation.


BME Brake Rectifier - Frame size for 71 to 225

The BME Brake Rectifier is a half-wave rectifier with overvoltage protection components and electronic controls to reduce brake release response time. Its function is similar to the rectifier type BGE, but it is designed to be mounted in a control panel on a DIN rail instead of being mounted in a motor conduit box. The BME has the same high executive function as BGE for fast brake release, allowing the motor brake system to cycle at high rates. We can connect the BME to normal or fast braking reaction times. The environmental conditions in which BME is primarily used for motors do not allow the use of BGE rectifiers installed in the motor junction box.


SEW rectifier block BG1.5/BGE1.5/BMH1.5/BME1.5/BME3 size

image.png

image.png


SEW rectifier block BG1.5/BGE1.5/BMH1.5/BME1.5/BME3

IZE INDUSTRIES special distribution, common spare parts SEW rectifier block series list:

SEW rectifier block BG1.5

SEW rectifier block BGE1.5

SEW rectifier block BMH1.5

SEW rectifier block BME1.5

SEW rectifier block BME3



Who we are

IZE-industries was established in 2010.With its many years of professional experience, providing advanced manufacturing industries technology and equipment. Including advanced electrical automation, machinery and transmission, fluid control, instrumentation, tools and other products. As a partner in electrical, hydraulic and pneumatic solutions, we also provide our customers with consulting solutions, market knowledge, and value-added services.

What we offer

Engineering and Consulting

Full-service controls engineering and consulting solutions for industrial

manufacturing equipment, including:

Electrical design

PLC programming and repair

Process optimization

Down-time consultation

spare parts from the areas, including:

Hydraulic, Pneumatic, Industrial, Automation technology.

Please contact us for complete stock list or special discount.


If you have any question for SEW rectifier block BG1.5/BGE1.5/BMH1.5/BME1.5/BME3, please feel free to dial 0086-21-3100 6702 or browse our website: www.ize-industries.com.


For more detailed information on the SEW rectifier block BG1.5/BGE1.5/BMH1.5/BME1.5/BME3 or to purchase SEW related products, please contact IZE Industries.


SEW rectifier block BG1.5/BGE1.5/BMH1.5/BME1.5/BME3 introduction and size

免责声明:本网站的布局,设计和编辑版权归©上海爱泽工业设备有限公司(简称ize-industries)所有,保留所有相关权利。 Ize-industries销售工业领域的全新产品,库存产品,并不断开发渠道购买此类产品。 本网站未经所有制造商或商标授权或批准。ize-industries不是所有制造商的授权经销商,附属公司或代表处。除非另有明确说明,否则此处出现的指定商标,品牌名称和品牌均为其各自所有者的财产。