IZE学院 订单查询

0086-21-31006702 联系我们 关于我们 账号注册及登录EN
您当前的位置: 首页 >> 产品中心 >> 行业专用设备-制造装备 >> 汽车制造 >> 声级计 >> SINUS声级计

SINUS声级计

请注意:照片可能并不是实际产品,具体请参阅标题和产品规格及所有细节描述。
产品品牌:
型号:TangoPuls
SINUS声级计TangoPuls
预估货期:
关  键  词:SINUS声级计TangoPulsSINUS声级计技术手册TangoPuls技术说明
相似产品:
是否有问题?联系我们工作人员
  邮件联系
爱泽工业(ize-industries)并不是本网站所列所有产品的授权代理商或经销商。 本网站使用的所有产品名称,商标,品牌等均属于各自品牌厂家所有。 本网站在产品或图片描述中,出现具有这些名称,商标,品牌等信息的产品仅用于识别目的,并非旨在表明任何与持有者的从属及授权关系。

SINUS声级计TangoPuls概述

Tango Plus声级计,适用于工作场所和环境保护所需的所有测量

Tango Plus声级计符合IEC 61672标准,带有1/1和1/3倍频程分析仪,适用于工作场所和环境保护应用。由于其智能软件概念和110 dB的测量范围而无需切换到另一个范围,Tango Plus仍然非常易于操作,尽管其功能强大。


可以通过延长线使用可拆卸麦克风和前置放大器。可应要求提供户外保护套件。测量值显示在TFT彩色显示屏上,即使在阳光下或黑暗中的较大距离也可读取。清晰排列的键盘具有可感知的击键。


Tango Plus基于最先进的电路技术,具有极低的功耗。两节电池(1.2 ... 1.5 V,AA尺寸)保证40小时的运行时间和10年的存储时间(锂电池)。因此,Tango Plus 几乎随时可以使用。该仪器具有1/1或1/3倍频程值的实时频率分析仪功能。


Tango Plus声级计允许同时进行A和C频率加权以及快速,慢速和脉冲时间加权。除了瞬时声级值之外,仪器还允许测量给定时段内的最大和最小声级值。Tango还可以测量LAeq,LCeq,LAtm5和LAtm5-LAeq值。

该仪器具有1/1或1/3倍频程值的实时频率分析仪功能。


同时计算在设置中选择的所有测量值,并选择其中一个值进行显示。开始积分测量后,将自动保存所有值。借助USB接口和Tango-Utilities软件,可以从存储器中读取测量值,保存并转换为标准办公格式。此外,该软件允许定义用户定义的设置并将其传输到设备(测量值,存储周期,百分位数)。


Tango Plus的典型应用:

交通和工业噪声测量

社区和娱乐噪声监测

工作场所噪音测量

监控/记录交通噪音

职业噪声测量

频率分析以1/1或1/3实时进行。


现代技术结合了最高的精确度和最简单的操作

通过在每次测量之前校准声级计,可以显着提高测量精度。关闭设备后,此校准也保持不变。由于价格合理,操作简单,尺寸小,Tango Plus是所有用户的理想仪器,其测量任务需要符合IEC 61672标准的1类测量设备。


全面存储器管理方案允许为各种测量值选择不同的存储周期。为了防止没有经验的用户选择不正确的设置,可以通过界面(简易操作员模式)禁用设置功能。


已申请PTB型式认可(德国的法定可校准性)。


频率分析仪的1/1和1/3倍频程

Tango Plus声级计包括一个实时频率分析仪功能,具有1/1和1/3倍频程,符合IEC 61260 Class 1标准。


工作场所保护应用

对于劳动保护应用,除了C加权值之外,还可以测量三个可自由选择的LCPeak阈值的超时时间。这种非标准测量值可以比单独测量峰值值更好地捕获工作场所的噪声暴露程度。


环保应用

Tango Plus允许测量和保存三个可自由选择的统计值。这些L AFN%百分位表示在测量时间的N%中超过A加权水平。


通过集成软件包TANGO-Utilities for Window实现最高的易用性

Tango Plus声级计也可以通过USB接口操作。在这种情况下,PC通过接口为设备供电(供货范围还包括用于主电源的USB适配器)。随附的Tango-Utilities软件允许通过PC操作和配置仪器以及两个设备之间的数据传输。


PC上显示一个单独的窗口,可以轻松设置参数并快速传输存储的测量值。Tango的一个独特功能是可以存储多个测量值和单独的采样时间。显示保存的测量值的文件名和大小以进行传输或删除。USB接口还使用户能够轻松地将Tango Plus集成到基于PC的测量系统中


Tango Plus - sound level meter for all measurements necessary in workplace and environmental protection

The Tango Plus sound level meter according to IEC 61672 with 1/1 and 1/3 octave analyser for workplace and environmental protection applications. Due to its intelligent software concept and its measuring range of 110 dB without switching to another range, TangoPlus is still very easy to operate despite its high functionality.


It is possible to use the detachable microphone & preamplifier via extension cable. An outdoor protection kit is available on request. The measured values are shown on a TFT colour display and are readable even over larger distances in sunlight or in darkness. The clearly arranged keyboard has a perceptible keystroke.

Tango Plus has, based on state-of-the-art circuit technology, a very low power consumption. Two batteries (1.2 ... 1.5 V, size AA) guarantee an operation time of 40 h and a storage time of 10 years (for lithium batteries). Therefore TangoPlus is practically always ready for use. The instrument has a real-time frequency analyser function for 1/1 or 1/3 octave values.


The Tango Plus sound level meter allows for simultaneous A and C-frequency weightings as well as Fast, Slow and Impulse time weightings. In addition to the momentary sound level values, the instument allows the maximum and minimum sound level values over a given period to be measured. Tango can also measure the LAeq, LCeq, LAtm5 and LAtm5-LAeq values.

The instrument has a real-time frequency analyser function for 1/1 or 1/3 octave values.


All measurement values chosen in the Setup are computed simultaneously and one of these values is selected for display. After starting the integrating measurement, all values are saved automatically. With the help of the USB interface and the Tango-Utilities software, the measured values can be read from the memory, saved and converted to a standard office format. Additionally, the software allows a user-defined setup to be defined and transferred to the device (measured values, storage cycles, percentiles).


Typical application of Tango Plus:

Traffic and industrial noise measurements

Neighborhood and recreation noise monitoring

Workplace noise measurements

Monitoring / logging of traffic noise

Occupational noise measurements

Frequency analysis in 1/1 or 1/3octaves in real-time.


Modern technology combines utmost accuracy with simplest operation

The accuracy of the measurement may be considerably improved by calibrating the sound level meter before each measurement. This calibration also remains intact after switching off the device. Because of its reasonable price, easy operation and small dimensions, TangoPlus is the ideal instrument for all users whose measurement tasks require a Class 1 measuring device according to the IEC 61672 standard.


A comprehensive memory management scheme allows different storage cycles to be selected for the various measurement values. In order to prevent incorrect settings from being selected by inexperienced users, the Setup function can be disabled via the interface (Easy Operator Mode).


Type approval by the PTB (legal calibratability in Germany) has been applied for.


Frequency analyser in 1/1 and 1/3 octaves

The Tango Plus sound level meter includes a real-time frequency analyser function with 1/1 and 1/3 octaves according to IEC 61260 class 1 as standard.


Workplace protection applications

For labor protection applications, in addition to the Cweighted values, the exceedance times for three freely-selectable LCPeak thresholds can be measured. This non-standard measurement values allows the degree of noise exposure at a workplace to be captured much better than a measurement of the peak value alone.


Environmental protection applications

Tango Plus allows three freely-selectable statistical values to be measured and saved. These LAFN% percentiles express what A-weighted level was exceeded in N% of the measurement time.


Highest ease of use via integrated software package TANGO-Utilities for Window


The TangoPlus sound level meter may also be operated via USB interface. In this case the PC powers the device through the interface (the scope of delivery also includes a USB adapter for mains power supply). The included Tango-Utilities software allows the operation and configuration of the instrument via PC as well as the data transfer between the two devices.


A separate window is displayed on the PC which allows easy setting of the parameters and rapid transfer of the stored measurement values. A unique feature of Tango is that several measurement values can be stored with individual sample times. The file names and sizes of the saved measurement values are displayed for transfer or deletion. The USB interface also enables the user to integrate TangoPlus easily into a PC-based measuring system.


SINUS声级计TangoPuls技术规格

image.png


爱泽工业(IZE INDUSTRIES)特价经销、常用SINUS声级计型号

SINUS声级计Tango

SINUS声级计Tango Plus

SINUS声级计Boogie

SINUS声级计SC420

SINUS声级计CEL-62X

SINUS声级计CEL-63X



爱泽工业集产品开发、设计、制造、销售、服务于一体,代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气,液压以及气动解决方案的合作伙伴,我们利用我们的全球协作团队,为客户提供先进解决方案,市场知识以及相关增值服务来帮助优化客户的工作效率,提高可靠性和安全性,致力于成为工业产品和解决方案的首选渠道。

 

如果有任何关于SINUS声级计TangoPuls的疑问,请随时致电我们,爱泽工业(86-021-31006702)。我们将尽全力解决您的问题。


有关SINUS声级计TangoPuls产品更详细的信息或者购买SINUS相关产品,请致电爱泽工业。


If you have any question, please feel free to dial 0086-21-3100 6702 or browse our website: www.ize-industries.com.


SINUS声级计TangoPuls技术规格及概述

免责声明:本网站的布局,设计和编辑版权归©上海爱泽工业设备有限公司(简称ize-industries)所有,保留所有相关权利。 Ize-industries销售工业领域的全新产品,库存产品,并不断开发渠道购买此类产品。 本网站未经所有制造商或商标授权或批准。ize-industries不是所有制造商的授权经销商,附属公司或代表处。除非另有明确说明,否则此处出现的指定商标,品牌名称和品牌均为其各自所有者的财产。