ACKSYS工业路由器AIRBOX系列技术规格
Technical characteristics overview | |
Ethernet interface | 2-port Gigabit Ethernet 10/100/1000 auto-sensing, Base TX, auto MDI/MDIX, RJ45 Ethernet interface |
Cellular interfaces +Navigation | Not available on these models, please refer to the datasheet of AirBox LTE. |
Cellular radio data rate | Not available on these models, please refer to the datasheet of AirBox LTE. |
Cellular operating frequencies | Not available on these models, please refer to the datasheet of AirBox LTE. |
WiFi interfaces | 2.4 / 5 GHz, ANI (Adaptive Noise Immunity) |
WiFi radio data rate | 802.11a: 6, 9, 12, 18, 24, 36, 48 and 54 Mbps |
WiFi operatingfrequencies | ISM : 2.4-2.483 GHz (up to 14 channels) |
Output power | AirBox/10 - • up to 23.5 dBm (aggregate) at 2.4 GHz • up to 21 dBm (aggregate) at 5 GHz |
Sensitivity max. | AirBox/10 - • -94 dBm at 2.4 GHz • -96 dBm at 5 GHz |
Radio connectors | • AirBox/10 : 2 x RP-SMA • AirBox/12 : 2 x RP-SMA (WiFi 1) + 3 x RP-SMA (WiFi 2) |
Security | Firewall, DoS, https, MAC filtering, WPA/WPA2-Personal & Enterprise (IEEE 802.1X/RADIUS), WEP, tunnels L2 (GRE),VPN (OpenVPN), SNMP V3, client isolation in AP mode |
WiFi modes | AP, client, MESH (IEEE 802.11s), infrastructure, AD-HOC, fast roaming (less than 30 ms), WMM QoS |
Ethernet networking | Frames filtering, bridging, repeater, STP/RSTP, VLAN, DHCP (server & client), DNS relay |
Ethernet routing | Multicast (PIM), IP redundancy (VRRP), static routes, NAT router, router |
Administration | http, https, SNMP agent (V1, V2C, V3), WaveManager administration software |
I/O | - 2 solid state relay output warnings (with configurable action), 1 Form A, 60VDC 80mA max |
LEDs Signaling | Radios : activity - status | Ethernet : 10/100/1000 link - activity | GPS : status | Power : on-off (x2) |
Power supply | +9VDC to +48VDC (redundant, 5-pin Phoenix connector) or PoE 802.3af powered device (from model V2) |
Consumption | • AirBox/10 : 6 W typical - 7 W max • AirBox/12 : 11 W typical - 15 W max |
Dimensions & weight | Compact case L : 141.2 x l : 99 x h : 35 mm, weight without accessories : • /10 = 318g • /12 = 348g |
Standards and certifications | CE (RED) Safety : EN 62368-1:2014+A11, EN62311 |
Environment | • IP30 • Operating temperature: -20°C to +60°C , storage: -40°C à +85°C, humidity: 0% to 99% (non-condensing) |
ACKSYS工业路由器AIRBOX系列介绍
WiFi access point, client or repeater modes
Mesh function to wirelessly interconnect access points
Optional 4G router + positioning (GNSS)
Advanced security (Firewall, VPN, radius ...)
High availability : 2 redundant Ethernet ports, redundant wide range power supply input (+9 to +48 VDC) & PoE 802.3af (from model V2)
Compact case, wall or DIN Rail mounting
Centralized administration and configurations management
2 isolated inputs + 2 isolated outputs
Introduction
Available in dual WiFi radio version (11n + 11ac), AirBox fits directly into the era of Industry 4.0 by offering dual band (2.4 / 5GHz) connectivity to objects (IIoT, PLCs, tablets ...) and strengthening the communication between machines (M2M). AirBox supports up to 80 clients connected simultaneously (@ 2Mbps) in AP mode and can be integrated in electrical cabinets as in tight spaces (antenna fitted externally).
The single radio model (WiFi 11n) can be used in client mode to remotely connect any Ethernet equipment or PLCs as well as mobile devices (trolleys, AGVs) to the factory wireless infrastructure.
AirBox advantageously leverages MIMO technology to strengthen the radio link and features a high-performance roaming algorithm (< 30ms) to ensure seamless communication in motion, even in environments with very high density of AP.
AirBox embedded intelligence simplifies the network design and does not require any wireless LAN controller.
Administration is centralized via ACKSYS WaveManager software.
Network is secured thanks to AirBox high level of security (Firewall, VPN, 802.1X ...).
Two pairs of digital I/O are controllable with the SNMP protocol to operate remote equipment or read the logic state of a signal.
WiFi 接入点、客户端或中继器模式
用于无线互连接入点的网状功能
可选4G路由器+定位（GNSS）
高级安全性（防火墙、VPN、radius ...）
高可用性：2 个冗余以太网端口、冗余宽范围电源输入（+9 至 +48 VDC）和 PoE 802.3af（来自型号 V2）
紧凑型外壳、墙壁或 DIN 导轨安装
集中管理和配置管理
2 个隔离输入 + 2 个隔离输出
介绍
AirBox提供双WiFi无线电版本 (11n + 11ac)，通过提供与对象（IIoT、PLC、平板电脑...）的双频段 (2.4 / 5GHz) 连接并加强机器之间的通信，直接适应工业4.0时代（ M2M）。AirBox支持在AP模式下同时连接多达80个客户端 (@ 2Mbps)，并且可以像在狭小空间一样集成到电气柜中（天线安装在外部）。
单无线电模型 (WiFi 11n) 可在客户端模式下使用，将任何以太网设备或PLC以及移动设备（手推车、AGV）远程连接到工厂无线基础设施。
AirBox有利地利用MIMO技术来加强无线电链路，并具有高性能漫游算法（< 30 毫秒）以确保运动中的无缝通信，即使在 AP 密度非常高的环境中也是如此。
AirBox嵌入式智能简化了网络设计，不需要任何无线局域网控制器。
通过ACKSYS WaveManager软件集中管理。
由于AirBox的高安全级别（防火墙、VPN、802.1X ...），网络得到了保护。
两对数字I/O可通过SNMP协议控制以操作远程设备或读取信号的逻辑状态。
ACKSYS工业路由器其他常用型号：
ACKSYS AirBox10
ACKSYS AirBox12
ACKSYS AirBox LTE
ACKSYS Industrial router NEW + ORIGINAL+ ONE YEAR WARRANTY
爱泽工业成立于2010年，定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气，液压以及气动解决方案的合作伙伴，我们利用我们的全球协作团队，为客户提供先进解决方案，市场知识以及相关增值服务来帮助优化客户的工作效率，提高可靠性和安全性，致力于成为工业产品和解决方案的优质渠道。
如果有任何关于ACKSYS工业路由器AIRBOX10的疑问，请随时与我们电联，（021-3100 6702），我们将尽全力解决您的问题。
If you have any question for ACKSYS products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: www.ize-industries.com.
ACKSYS工业路由器AIRBOX系列AIRBOX10技术参数及介绍
